Your patio or driveway looks worn, cracked, or dated. We install decorative concrete in Burton that brings color, texture, and pattern to any outdoor surface - built with a cold-climate mix so it still looks great after a Genesee County winter.

Decorative concrete in Burton, MI is standard concrete that has been colored, stamped, or finished to look like stone, brick, or tile - most projects take one to three days and give you the durability of concrete with an appearance that plain gray cannot match.
Many Burton homeowners have upgraded their siding, landscaping, or front door over the years but still have concrete out front that looks like it was poured in 1968. Decorative concrete closes that gap. It is one of the most cost-effective ways to bring your outdoor spaces up to the same standard as the other improvements you have made - and it adds real value if you are thinking about selling in the next few years.
The most important difference from basic concrete is not the look - it is the finish and sealer that protect the surface. Michigan winters are hard on outdoor concrete, and decorative work needs a cold-climate mix and a penetrating sealer to hold up. If you are also considering a stamped look specifically, our stamped concrete services page goes deeper on patterns and textures available.
If your driveway or patio has surface flaking - chunks of the top layer peeling off - or cracks running through it, the concrete has been worn down by Michigan's freeze-thaw cycles over the years. Once flaking starts, it tends to get worse each winter. Decorative concrete with a proper sealer can replace the worn surface and hold up far better going forward.
If you have updated your landscaping, siding, or front door but your concrete still looks like original 1960s work, the mismatch is noticeable. Decorative concrete is one of the most cost-effective ways to bring your exterior up to the same standard as the improvements you have already made.
Standing water after a rainstorm usually means the surface was not sloped correctly, or the slab has settled unevenly - something that happens more often on Burton's clay-heavy soils. Beyond being a nuisance, pooling water speeds up freeze-thaw damage. New decorative concrete can be graded correctly from the start.
Older Burton neighborhoods have mature trees, and roots can push up under concrete slabs over decades. If sections of your driveway or walkway have lifted, tilted, or broken apart at the edges, the slab has reached the end of its useful life. Replacing it with properly reinforced decorative concrete gives you a safe, clean surface.
We install decorative concrete for patios, driveways, walkways, and pool surrounds throughout Burton and Genesee County. The three main options are stamped concrete - where a pattern is pressed into the surface while the concrete is still wet - stained concrete - where color is applied after the slab cures - and exposed aggregate - where small stones are revealed on the surface for a natural texture. Each suits different uses and aesthetics, and we will help you choose based on where the surface is, how much foot and vehicle traffic it gets, and what look you are going for.
Every project includes full base preparation - demolition of any old concrete, grading, and a compacted gravel layer - because the most common reason decorative work fails in this area is a poorly prepared base on Burton's clay soil. We also handle permits through the City of Burton when your project requires one. For a broader look at how we build outdoor living spaces, our concrete retaining walls service can complement decorative flatwork with grade changes or garden borders on your property.
Best for homeowners who want the look of stone, brick, or slate on a patio or driveway without the cost or maintenance of the real thing.
Suited to existing slabs that are structurally sound and just need color - applied after curing in a range of earth tones and custom shades.
Right for driveways and walkways where you want a textured, slip-resistant surface with a natural stone appearance.
For homeowners whose existing slab is in good shape structurally - a thin layer adds color and texture without a full tear-out.
Burton sits in Genesee County, where temperatures regularly drop below freezing from November through March and can swing above and below 32 degrees Fahrenheit multiple times in a single week. That repeated freezing and thawing is the single biggest threat to decorative concrete surfaces - it is what causes color to fade and surfaces to crack or flake when the mix was not designed for cold weather or when the sealer has worn off. When you are getting quotes, ask whether the contractor uses an air-entrained mix - that means tiny air pockets are built into the concrete to absorb the stress of freezing. Without it, your surface is more likely to fail within a few winters, which is a common outcome in this climate. Portland Cement Association publishes guidance on cold-weather concrete practices that is worth reading if you want to understand what the right mix looks like.
A large share of Burton's housing was built in the 1950s through 1970s, and many of those original driveways and patios are still in place. Older slabs in these neighborhoods often have underlying issues - tree root damage, settled soil from clay movement - that have to be addressed before decorative concrete can be installed properly. We serve homeowners across Burton and nearby communities, including Grand Blanc and Davison - and we know the specific soil and climate conditions that affect how decorative concrete is installed and maintained in this part of Michigan.
Reach out by phone or through the form on this page. We respond within one business day. We will ask about the area you want done, roughly how big it is, and what style you are thinking - so we show up to your site prepared.
We come to your home, measure the space, check the condition of any existing concrete, and look at soil and drainage. This is your chance to show us styles you like. You receive a written quote that breaks down demolition, base prep, the pour, finishing, and sealing - no vague totals.
If your project requires a permit from the City of Burton, we handle the application. Once approved, you get a firm start date. In peak season - May through August - expect a two- to four-week wait for an opening on a good contractor's schedule, so early outreach pays off.
Prep day handles demolition and base work. Pour day brings the concrete and the finish. After curing - 24 to 48 hours for foot traffic, up to a week for vehicles - we apply a protective sealer and walk the finished surface with you before we leave.
Free written estimate. We handle permits. Responds within one business day.
(810) 204-9905We use an air-entrained concrete mix on every decorative project in Burton - not as an upgrade, as the baseline. It is the difference between a surface that survives a Genesee County winter and one that starts cracking or fading within a season. The Concrete Network outlines why this matters specifically for decorative work in freeze-thaw climates.
The most common reason decorative concrete fails early in this area is a poorly prepared base on clay-heavy soil that shifts with the seasons. We compact the subbase and add a proper gravel layer before any concrete goes down. This is the step that keeps your surface level and crack-free for decades.
New driveways in Burton typically require a city permit before work can start. We handle the application with the City of Burton Building Department and will not start pouring until everything is properly approved. You do not have to make a single call to the building department.
A penetrating sealer is applied after every decorative concrete project we complete. Without it, color fades and moisture gets in. In Burton's road-salt-heavy winters, skipping the sealer is a predictable path to early surface breakdown. We include it because leaving it out would mean doing the job only halfway.
We have worked on decorative concrete projects across Burton and Genesee County for years - patios, driveways, walkways, and pool surrounds. The combination of proper mix design, base preparation, and sealing is what produces results that still look good a decade later.
Grade changes, garden borders, and erosion control - concrete retaining walls that complement decorative flatwork on your property.
Learn MoreA closer look at patterns, textures, and color options for stamped concrete specifically.
Learn MoreBurton's outdoor season is short - reach out now so your project is done and ready to enjoy before summer slips away.